Snap™ II Cleaner Disinfectant phosphate-free formulation 32 fl. oz x 2 bottles

Snap™消毒清潔劑的配方不含磷酸鹽，專為提供有效的清潔所設計，特別是首重於環境清潔以控制的交叉感染的醫院、護理之家、學校、食品加工廠、食品服務機構、交通轉運站、辦公大樓、製造設施、住宿設施、零售機構、運動/娛樂設施及居家環境。Snap消毒清潔劑經美國國家環境保護局(EPA)註冊認證（EPA註冊號碼：1839-95 – 55948；審核批准編號：55948-NC-01）。想要輕鬆解決消毒清潔問題？讓Snap消毒清潔劑幫您搞定

益處

1瓶抵得上高達32瓶知名品牌的抗菌萬用清潔劑

清潔、消毒、除臭三效合一

濃縮清潔劑，可消毒、殺除真菌、病毒與黴菌

不含磷酸鹽，易生物分解

適於清潔浴室、廚房、醫院、寵物籠、安養院、運動/娛樂設施、餐飲設備等

美國環保署(EPA)註冊消毒劑* *EPA Reg. No. 1839-95–68709; EPA Est No. 55948-NC-01

如何使用Snap消毒清潔劑？

消毒：為消毒非活體、堅硬、不透氣表面，請於每1加侖的清水中加入2盎司的Snap消毒清潔劑。使用此溶劑時，請用抹布、布料、海綿、手持式噴霧瓶或低壓粗孔噴霧瓶以徹底濕潤所有表面。讓溶劑靜置10分鐘，再去除多餘的液體。若是嚴重髒污的區塊，則需進行預先處理。每次使用都需準備新的溶劑。

消毒馬桶：先沖馬桶，再直接將2盎司的Snap消毒清潔劑加入馬桶水中。使用馬桶刷或廁所抹布徹底清潔馬桶，確保馬桶邊緣也有清潔到。刷完後，讓溶劑停留10分鐘再沖掉。

消毒食品加工廠：使用本產品進行消毒前，請清空該區域的食物產品及包裝材料，或將其仔細隔離。消毒地板、牆壁與儲存區域，請於每1加侖的清水中加入2盎司的Snap消毒清潔劑。若是嚴重髒污的區塊，則需進行預先處理。使用此溶劑時，請用抹布、布料、海綿、手持式噴霧瓶或低壓粗孔噴霧瓶以徹底濕潤所有表面。讓溶劑在表面靜置10分鐘，再去除多餘的液體。消毒後，必須用飲用水徹底沖洗該區域的所有表面。

消毒食品服務業場所與食物接觸的表面：使用本產品進行消毒前，請清空該區域的食物產品及包裝材料，或將其仔細隔離。消毒檯面、器具與桌面，請於每1加侖的清水中加入2盎司的Snap消毒清潔劑。若是嚴重髒污的區塊，則需進行預先處理。使用此溶劑時，請用布料、海綿、手持式噴霧瓶或低壓粗孔噴霧瓶以徹底濕潤所有表面。讓溶劑在表面靜置10分鐘，再去除多餘的液體並以飲用水徹底沖洗表面。本產品無法用於清潔以下與食物接觸的表面：器皿、玻璃器皿及餐具。

殺菌力（細菌）：當以每1加侖清水加入2盎司產品的比例稀釋時，Snap消毒清潔劑會產生一步消毒作用，可有效對抗以下有機體：綠膿桿菌PRD 10、大腸桿菌、克雷白氏肺炎菌、沙門氏菌、腸道沙門氏菌、唾液鏈球菌、產氨棒狀桿菌、糞鏈球菌、痢疾志賀桿菌、產氣腸桿菌、金黃色葡萄球菌、抗甲氧苯青黴素金黃色葡萄球菌、對萬古黴素敏感度下降的金黃色葡萄球菌、釀膿鏈球菌（臨床食肉菌株BIRD M3），並符合所有醫療機構之使用要求。

殺菌力（黴菌）：以每1加侖水/2盎司產品的比例稀釋，依指示將溶劑用於浴室、淋浴間、更衣室、運動設施的堅硬表面、或其他常以赤腳接觸的乾凈、堅硬、不透氣表面，Snap消毒清潔劑也可對抗病原菌 － 鬚髮癬菌（足癬的病原體，造成足部癬菌病的因素）。請遵循消毒指示。

化學制菌劑：抑制預先清潔好的堅硬、不透氣表面上的發霉與黴菌，請於每1加侖的清水加入2盎司的Snap消毒清潔劑。使用此溶劑時，請用布料、抹布、海綿、手持式噴霧瓶或低壓粗孔噴霧瓶以徹底濕潤所有表面。使其自然風乾。每次使用都需準備新的溶劑。每週使用一次，或在產生黴菌時使用。

病毒破壞力：用於環境、非活體、堅硬、不透氣的表面，以每1加侖清水/2盎司產品的比例稀釋，Snap消毒清潔劑可產生有效的病毒破壞力，以對抗A2/日本流感（代表普通流感病毒）、第一型單純皰疹（發燒性水泡的病原體）、第二型腺病毒（上呼吸道感染的病原體）、痘瘡病毒（痘病毒類的代表）、人類冠狀病毒(ATCC VR-740, Strain 229E)、第一型人類免疫缺乏病毒(HIV 1)、B型肝炎病毒(HBV)、C型肝炎病毒(HCV)、諾羅病毒、牛病毒性腹瀉病毒(BVDV)、貓杯狀病毒(FCV)、SARS相關冠狀病毒、豬呼吸道與繁殖症候群病毒(PRRSV) (Strain NVSL)、及A型禽流感。請遵循消毒使用方法。於醫療機構（醫院、護理之家）或其他可能於非活體表面/物體沾染血液或體液的機關設施的預先清潔過的環境表面/物體，在沾染血液/體液前殺除第一型人類免疫缺乏病毒(HIV 1)及B型肝炎病毒(HBV)，這些可能沾染血液/體液的表面/物體可能與第一型人類免疫缺乏病毒(HIV 1)（愛滋相關病毒）、B型肝炎病毒(HBV)及C型肝炎病毒(HCV)的傳播相關。

清潔與消毒可能沾染血液/體液的表面/物體的第一型人類免疫缺乏病毒(HIV 1)、B型肝炎病毒(HBV)及C型肝炎病毒(HCV)的特別說明：

個人防護：在處理沾染血液或體液的物體時，請使用丟棄式乳膠手套、防護衣、面罩與眼罩。清潔程序：使用Snap消毒清潔劑前，請先徹底清潔表面及物體上的血液及其他體液。

接觸時間：將溶液靜置於表面10分鐘。

處理傳染性物質：沾染血液與其他體液的物質必須以高壓滅菌，並根據當地法規處理傳染性廢棄物。效果測試已顯示本產品對有機髒污（5%血清）來說，是一款有效的殺菌劑（細菌、黴菌及病毒）。

一般清潔：使用Snap消毒清潔劑時，請用抹布、布料、海綿、手持式噴霧瓶或低壓粗孔噴霧瓶清潔髒污區域。Snap消毒清潔劑可以每1加侖清水加入2盎司產品的比例稀釋，也可以直接使用。請徹底濕潤髒污表面並依需求擦洗。除臭：如欲消除異味，請依照上述的消毒指示使用本產品。

成分

洗淨劑和起泡劑（陰離子和非陰離子界面活性劑）、水、質控劑、泡沫穩定劑、蘆薈膠、香精及FD&C著色劑。

Snap II Cleaner Disinfectant is a phosphate-free formulation designed to provide effective cleaning, deodorization and disinfection specifically for hospitals, nursing homes, schools, food processing plants, food service establishments, transportation terminals, office buildings, manufacturing facilities, lodging establishments, retail businesses, athletic/recreational facilities and households where housekeeping is of prime importance in controlling the hazard of cross-contamination. Snap II Cleaner Disinfectant is EPA Registered (EPA Reg. No. 1839-95 – 55948; EPA Est. No. 55948-NC-01) Make household disinfecting a SNAP with Snap II Cleaner Disinfectant!

One bottle replaces up to 32 bottles of the leading anti-bacterial all-purpose cleaner

Cleans, disinfects and deodorizes

Concentrated cleaner, sanitizer, fungicide, virucide and mildewstat

Phosphate free

Readily biodegradable

Perfect for bathrooms, kitchens, hospitals, pet kennels, nursing homes, athletic/recreational facilities, food service establishments and much more!

EPA-registered disinfectant* *EPA Reg. No. 1839-95–68709; EPA Est No. 55948-NC-01

How do I use Snap Disinfectant Cleaner?
DISINFECTION: To disinfect inanimate, hard, non-porous surfaces, add 2 ounces of Snap II  Cleaner Disinfectant per gallon of water. Apply solution with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. For heavily soiled areas, a pre-cleaning step is required. Prepare a fresh solution for each use.

To disinfect toilet bowls: Flush toilet and add 2 ounces of Snap II Cleaner Disinfectant directly to the bowl water. Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 10 minutes and flush.

To disinfect food processing premises: Before using this product, food products and packaging materials must be removed from the area or carefully protected. For floors, walls and storage areas, add 2 ounces of Snap II Cleaner Disinfectant per gallon of water. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow the surface to remain wet for 10 minutes, then removed excess liquid. After use, all surfaces in the area must be thoroughly rinsed with potable water.

To disinfect food-service establishment food contact surfaces: Before using this product, food products and packaging materials must be removed from the area or carefully protected. For countertops, appliances and tables, add 2 ounces of Snap II Cleaner Disinfectant per gallon of water. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow the surface to remain wet for 10 minutes, then removed excess liquid and rinse the surface with potable water. This product cannot be used to clean the following food contact surfaces: utensils, glassware and dishes.

BACTERICIDAL ACTIVITY: When diluted at the rate of 2 ounces per gallon of water, Snap II  Cleaner Disinfectant exhibits effective, one-step disinfectant activity against the organisms: Pseudomonas aeruginosa PRD 10, Escherichia coli , Klebsiella pneumonia , Salmonella schottmuelleri , Salmonella enterica , Streptococcus salivarius , Brevibacterium ammoniagenes , Streptococcus faecalis , Shigella dysenteriae , Enterobacter aerogenes , Staphylococcus aureus , Methicillin-Resistant Staphylococcus aureus (MRSA), Vancomycin Intermediate Resistant Staphylococcus aureus (VISA) and Streptococcus pyogenes (Clinical-Flesh-Eating Strain BIRD M3) and meets all requirements for hospital use.

FUNGICIDAL ACTIVITY: At the 2 ounces per gallon dilution, Snap II Cleaner Disinfectant is also fungicidal against the pathogenic fungi Trichophyton mentagrophytes (causative agent of athlete’s foot fungus, a cause of ringworm of the foot) when used as directed on hard surfaces found in bathrooms, shower stalls, locker rooms, exercise facilities or other clean, hard, non-porous surfaces commonly contacted by bare feet. Follow the Disinfection directions.

MILDEWSTAT: To control mold and mildew on pre-cleaned, hard, non-porous surfaces, add 2 ounces of Snap II Cleaner Disinfectant per gallon of water. Apply solution with a cloth, mop, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer making sure to wet all surfaces completely. Let air dry. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.

VIRUCIDAL ACTIVITY: Snap Disinfectant Cleaner, when used on environmental, inanimate, hard, nonporous surfaces at 2 ounces per gallon of water, exhibits effective virucidal activity against Influenza A2/Japan (representative of the common flu virus), Herpes Simplex Type 1 (causative agent of fever blisters), Adenovirus Type 2 (causative agent of upper respiratory infections), Vaccinia virus (representative of the Pox virus group), Human Coronavirus (ATCC VR-740, Strain 229E), Human Immunodeficiency Virus Type I (HIV 1), Hepatitis B Virus (HBV), Hepatitis C Virus (HCV), Norovirus (Norwalk Virus), Bovine Viral Diarrhea Virus (BVDV), Feline calicivirus (FCV), SARS Associated Coronavirus, Porcine Respiratory & Reproductive Syndrome Virus (PRRSV) (Strain NVSL) and Avian Influenza A. Follow the Disinfection directions. KILLS HIV-1, HBV AND HCV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in healthcare settings (hospitals, nursing homes) or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surface/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV).

SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1, HBV, AND HCV ON SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS:

PERSONAL PROTECTION: When handling items soiled with blood or body fluids, use disposable latex gloves, gowns, masks and eye coverings.

CLEANING PROCEDURES: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of Snap II Cleaner Disinfectant.

CONTACT TIME: Allow surface to remain wet for 10 minutes.

DISPOSAL OF INFECTIOUS MATERIALS: Blood and other body fluids should be autoclaved and disposed of according to local regulations for infectious waste disposal. Efficacy test have demonstrated that this product is an effective bactericide, fungicide and virucide in the presence of organic soil (5% blood serum).

GENERAL CLEANING: Apply Snap Disinfectant Cleaner to soiled area with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer. Snap II Cleaner Disinfectant can be diluted at 2 ounces per gallon or applied at full strength. Thoroughly wet soiled surface and scrub as necessary.

DEODORIZATION: To deodorize, apply this product as indicated under the heading Disinfection.

Does SNAP II Cleaner Disinfectant meet EPA’s criteria for use against SARS-CoV-2, the cause of COVID-19?

SNAP™ II Cleaner Disinfectant (“SNAP II) has been added to the EPA’s list of Disinfectants for Use Against SARS-CoV-2, the cause of COVID-19 (List N). According to the EPA, Snap II has a human coronavirus claim, and can be used against COVID-19 when the disinfection directions and preparation are followed with a contact time (the time the surface should remain wet) of 10 minutes. Please refer to the SNAP II label for complete Directions for Use.